-
Brief introduction to MOV of SPD
Dec 21 , 2021
Metal oxide varistor (MOV) is a semiconductor element with a unique grain boundary structure. Its resistance value decreases sharply with the increase of voltage. It has excellent nonlinear volt-ampere characteristics, as well as high current capacity, the lower residual voltage, no freewheeling and lower cost. That’s why mov has been the first choice to be used in power and signal ports as over-v...
Read More
-
The hazards of electrostatic discharge
Dec 22 , 2021
Electrostatic discharge (ESD) and electrical fast transients (EFT) cause different hazards to instrumentation systems. Electrostatic discharge produces strong radio frequency radiation in the frequency range of 5 to 200 MHz.The peak of this radiated energy often occurs between 35MHz and 45MHz, and self-oscillation occurs. The resonant frequency of many information transmission cables is usually wi...
Read More
-
Is it safe in a car during thunderstorm
Dec 23 , 2021
It's safer to sit in the car during thunder Reminder: all windows should be closed When thunder and lightning strikes, some drivers may have questions like: The car is made of metal. If it is struck by lightning, is it safe to sit in the car? Should you stay in the car or get out of the car to avoid it? It is understood that as a metal shell, the car body is equivalent to a shielded room. Even if ...
Read More
-
“Thunder and Snow”
Dec 23 , 2021
Thunder is common in summer, because the ground temperature is high, and convective clouds are more likely to form when warm and humid air rises, which creates conditions for lightning. In areas with relatively large undulations, thunder and rain are more common. This is because the warm air is blocked by mountains during the horizontal movement to form convection. In winter, the ground temperatur...
Read More
-
Concept of neutral and grounding
Dec 29 , 2021
Neutral connection: The neutral point of generators and distribution transformers is called the zero point, and the line drawn from the neutral point is called the neutral line. The metal shell of electrical equipment connected to the neutral line is called Neutral connection. Working grounding: The neutral point of the transformer of the power supply system is directly grounded as the w...
Read More
-
carbon peak and carbon neutrality
Dec 31 , 2021
In the context of carbon neutrality, my country is building a new power system with new energy as the main body. "New energy + energy storage" is considered the direction of the energy revolution. As the most active field of energy storage technology, large-scale electrochemical energy storage is helping the development of new power systems. New energy has the advantages of multi-dimensional obser...
Read More
-
The difference between wave welding and reflow soldering
Jan 04 , 2022
Wave soldering is a tin bar into a liquid state by tin slots, using a motor to form a peak, allowing the PCB to weld to the part, generally used in the hand-in-in-box soldering and SMT glue plate. Re-flowing welding is mainly used in the SMT industry, which is conducted by hot air or other thermal radiation, melting the solder paste printing on the PCB and welded. Different: Wave weld the flux, an...
Read More
-
Considerations on installing lightning straps and lightning protection network
Jan 04 , 2022
The lightning protection belt and its connecting line pass through a settlement ditch (settlement ditch: a long multi-storey building, which often divides the building into several sections horizontally, leaving a gap between sections to prevent inconsistent settlement of each section. When causing damage to the building), a spanning cable with an expansion and contraction margin of 10-20cm or mor...
Read More
